3-24
Multiple Instance Spanning-Tree Operation
Configuring MSTP
Configuring MSTP Per-Port Parameters
In an MSTP topology, you configure per-port parameters in the global config-
uration context.
In most cases, HP recommends that you use the default settings for these
parameters and apply changes on a per-port basis only where a non-default
setting is clearly indicated by the circumstances of individual links. Some port
parameters (such as admin-edge-port) affect all MSTI instances that consist of
VLANs configured on the port; other port parameters (such as path-cost) affect
only the specified MST.
Per Port Command Page
spanning-tree < port-list >
admin-edge-port below
auto-edge-port 3-25
bpdu-filter 3-28
bpdu-protection 3-30
hello-time < global | 1..10 > 3-25
mcheck 3-26
path-cost < auto | 200000000 > 3-38
point-to-point-mac < force-true | force-false | auto> 3-23
priority <priority-multiplier> 3-23
pvst-filter 3-34
pvst-protection 3-32
root-guard 3-27
tcn-guard 3-28
To Next Page
Loading...
Need help?
General
