3-59
Multiple Instance Spanning-Tree Operation
Displaying MSTP Statistics and Configuration
Displaying the Pending MSTP Configuration. This command displays
the MSTP configuration the switch will implement if you execute the span-
ning-tree pending apply command (Refer to “Enabling an Entire MST Region
at Once or Exchanging One Region Configuration for Another” on page 3-42.)
Figure 3-26. Example of Displaying a Pending Configuration
Syntax: show spanning-tree pending < instance | mst-config >
instance < 1..16 | ist >
Lists region, instance I.D. and VLAN information for the
specified, pending instance.
mst-config
Lists region, IST instance VLAN(s), numbered instances,
and assigned VLAN information for the pending MSTP
configuration.
HP Switch(config)# show spanning-tree pending instance 3
Pending MST Instance Configuration Information
MST Configuration Name : New-Version_01
MST Configuration Revision : 1
Instance ID : 3
Mapped VLANs : 3
Switch(config)# show spanning-tree pending mst-config
Pending MST Configuration Identifier Information
MST Configuration Name : New-Version_01
MST Configuration Revision : 1
IST Mapped VLANs : 1,2,4-4094
Instance ID Mapped VLANs
----------- ---------------------------------------
3 3
To Next Page
Loading...
Need help?
General
