Table 11-5 Service preventive maintenance alerts
Alert Description
Printer maintenance kit #1 required Replace the scan-axis motor and front bar SRV
Printer maintenance kit #2 required Replace the recoating unit carriage and sax chain assy SRV
Printer maintenance kit #3 required Replace the carriage
Build unit maintenance kit #1 required Replace platform nut and column gasket
NOTE: The Notification Center displays alerts only for the build unit that is inserted at that time.
Operator preventive maintenance alerts
Operator alerts require action by you.
The notification center displays alerts whenever a maintenance action is required.
Table 11-6 Operator preventive maintenance alerts
Alert Action required
Replace fusing agents intermediate
t
anks
Replace an intermediate tank on page 268
Replace detailing agents intermediate
t
anks
Replace an intermediate tank on page 268
Replace rubber blade Replace the printhead cleaning roll’s rubber blade on page 242
Check for alerts through the front panel status center
Any alert concerning the printer and the build unit is displayed at the top of the front panel in the status
cen
ter, which can be expanded by swiping down from the top.
Operator preventive maintenance alerts 105
To Next Page
Loading...