2. At the front panel, tap the Settings icon , then Utilities > Maintenance > Replace parts >
Heating lamps replacement.
3. Next time you switch on the printer, you can check the heating lamp status in the front panel’s
Supplies app.
Replace an intermediate tank
The following sections provide details for this topic.
Prepare for replacement
1. Ensure that the printer is not printing.
2. Turn off the printer.
3. If a job has just been printed, wait about 20 minutes for the printer to cool down.
4. You are recommended to wear gloves.
5. Ensure that all windows, covers, and doors are closed and remain in their original positions.
Replace an intermediate tank
The following steps provide the complete procedure for this topic.
1. At the front panel, tap the Settings icon
, then System tools > Printer reset counter >
Intermediate tank replacement.
2. Remove two screws from the side cover, then remove the cover.
268 Chapter 11 Hardware maintenance
To Next Page
Loading...