5. Open the front spout.
6. Remove the seal from the front spout.
CAUTION: Once the seal has been removed, the cartridge should be used until it is empty, and not
put in
to storage. Cartridges are not designed for storing material after removing the seal, and
storing an opened cartridge containing material can render the material unusable and cause
safety hazards, such as a cloud of material if dropped. Depending on the material, it can be
sensitive to temperature, humidity, or other factors. Using cartridges under uncontrolled conditions
can affect the functionality of the equipment or severely damage it.
7. Repeat steps 4–6 on spout 2.
138 Chapter 11 Hardware maintenance
To Next Page
Loading...