The entire metal frames of the SAX Curtain Frames unit (marked in blue in the following image) must
be cleaned with a lint-free cloth and general-purpose industrial cleaner.
The entire rear metal plate from the Build Unit must also be cleaned with the lint-free cloth and
gener
al purpose industrial cleaner (marked in blue in the following image).
Clean the front bar (after every job/daily)
Cleaning inside the printer.
Prepare for cleaning
1. Ensure that you have an absorbent all-purpose cloth (not provided by HP).
2. Ensure that the printer is not printing.
3. Turn off the printer.
Clean the front bar (after every job/daily) 157
To Next Page
Loading...