4. If a job has just been printed, wait about 20 minutes for the printer to cool down.
5. You are recommended to wear gloves.
Clean the front bar
1. Open the top cover.
2. Clean the front bar using a lint-free cloth dampened with deionized water.
3. Move the carriage manually in order to clean the part of the bar underneath the carriage.
CAUTION: When moving the print carriage manually, do it slowly, and be careful not to crash it into
any other component or the sides of the printer.
Finish cleaning
1. Close the top cover.
2. Ensure that all windows, covers, and doors are closed and remain in their original positions.
Clean the spittoon
Cleaning inside the printer.
158 Chapter 11 Hardware maintenance
To Next Page
Loading...