6. At the printer’s front panel, tap the Maintenance icon , then Heating lamps to see the status
of each lamp. Any lamp identified as faulty should be replaced by a functional lamp: tap the
Settings icon , then Utilities > Maintenance > Replace parts > Replace heating/fusing lamps.
The lamps are numbered; remember the numbers of any lamps to be replaced.
7. Ensure that all windows, covers, and doors are closed and remain in their original positions.
8. Turn off the printer.
Remove a heating lamp
The following steps provide the complete procedure for this topic.
Table 11-24 Warning labels
Risk of burns Crush hazard Risk of trapped
finger
s
Hazardous moving
part
Light radiation
hazard
Electric shock
hazard
For more safety information, see Safety precautions on page 4
1. Open the top cover.
264 Chapter 11 Hardware maintenance
To Next Page
Loading...