Figure 3-3 The Supplies tab
Figure 3-4 The About tab
Click Back or the breadcrumb to go back to the monitoring overview area.
Types of devices
Command Center can monitor all models of 3D printers, processing stations, build units, and cooling
fr
ames.
3D printers
This topic explains the concepts involved in this subject.
3D printers have the following sections:
● Build status: Information about the ongoing activity of the printer.
While a job is being printed, you can see the following information:
– JOB NAME
– MATERIAL
– PRINT PROFILE
– LAYERS: The number of layers printed, and the total number of layers to print
– HEIGHT: The height printed, and the total height to print
Types of devices 33
To Next Page
Loading...