– PARTS: The number of parts printed, and the total number of parts to print
● Builds: Information about the current job file that is being printed, the upcoming jobs, and the
pending job
s to be printed.
– UPCOMING JOB: This appears only when a new job has been submitted while the current job is
prin
ting, to be printed in the same build chamber
– PENDING JOBS: Jobs that are already stored in the printer, waiting to be printed when selected
● Supplies: Information about the health of all your supplies, with further information in case of any
w
arning or error.
NOTICE:
Different printer models may have different types of supplies.
– BUILD UNIT: Shows the status of the build unit and type of material in the build chamber, if the
prin
ter supports build units.
– FRESH MATERIAL: The percentage of material that is fresh (from a material cartridge); the rest
o
f the material is from the storage tank.
– AGENTS: A real-time display of the level of the agents.
– PRINTHEADS: Displays alerts or errors if any.
– OTHER SUPPLIES: Displays alerts or errors if any.
– FUSING LAMPS: Displays alerts or errors if any.
– HEATING LAMPS: Displays alerts or errors if any.
● About: Information about the printer, such as model and product number, as well as a link to activate
the w
arranty, and a link to the printer’s user guide.
Processing stations
This topic explains the concepts involved in this subject.
● Printed builds: Shows the job files that have been printed inside the inserted build unit.
● Supplies: Information about the health of all your supplies, with further information in case of any
w
arning or error.
NOTICE:
Different printer models may have different types of supplies.
● About: Information about the processing station, such as model and product number, as well as a
link t
o activate the warranty, and a link to the processing station’s user guide.
Device alerts
The following steps provide the complete procedure for this topic.
Cards may display warnings or errors, which may override the printer status, depending on their
impor
tance, which is determined by the printer.
● Warnings are about non-urgent issues, such as a maintenance routine. A warning about a particular
componen
t is displayed on the icon representing that component.
34 Chapter 3 Main components
To Next Page
Loading...