HP M8501 - Page 63

Troubleshooting
M8501 and M8502 ACL Tape Drive Installation and User’s Guide—529972-001
6-7
Fault Symptom Codes (FSCs)
Invalid bin number 305f F Invalid bin number detected in diag.
Zone Sequence Error 3060 C, G Eject command time-out.
Drive 0 Eject Failed 3074 C, G Eject command time-out.
Drive 1 Eject Fail 3075 C, D, G Eject command time-out.
Drive 2 Eject Fail 3076 C, D, G Eject command time-out.
Diag get drive 0 status
failed
3078 C, D, G Failed to get drive status, communication
error.
Diag get drive 1 status
failed
3079 C, D, G Failed to get drive status, communication
error.
Diag get drive 2 status
failed
307a C, D, G Failed to get drive status, communication
error.
Diag get drive 3 status
failed
307b C, D, G Failed to get drive status, communication
error.
Drive Stow Failed,
Media Returned to
Source
3082 F The DLT drive detected an SDLT cartridge
and the cartridge has been returned to its
orign.
Drive Stow Failed,
Media Remains in
Drive
3083 F The DLT drive detected an SDLT cartridge
but the cartridge could not be returned to
its origin.
UnSupported Drive
For Requested
Operation
3084 F Unsupported drive type.
No Retry On
Fetch/Stow
308F F The loader retried an operation and
retries were disabled.
Picker Jammed 3100 C, G The picker jammed during loader
initialization.
Picker Jammed 2 3102 C, G The picker jammed during a bin stow
operation.
Picker Jammed 3 3103 C, G The picker jammed during a bin stow
operation.
Picker Jammed 4 3104 C, G The picker jammed during a bin stow
operation.
Picker Jammed 5 3105 C, G The picker jammed during a bin stow
operation.
Picker Jammed 6 3106 C, G The picker jammed during a bin stow
operation.
Picker Jammed 7 3107 C, G The picker jammed during a passthru
fetch operation.
Picker Jammed 8 3108 C, G The picker jammed during a pass-thru
fetch operation.
Table 6-2. Fault Symptom Codes
Message FSC ERP