HP ProCurve 6120G/XG

RADIUS Authentication, Authorization, and Accounting
Using SNMP To View and Configure Switch Authentication Features
An alternate method of determining the current Authentication MIB access
state is to use the show run command.
ProCurve(config)# show run
Running configuration:
; 498358-B21 Configuration Editor; Created on release #Z.14.XX
hostname "ProCurve"
s
nmp-server mib
Indicates that SNMP access to the
authentication configuration MIB
hpSwitchAuthMIB excluded
ip default-gateway 10.10.24.55
(hpSwitchAuth) is disabled.
snmp-server community "public" Operator
vlan 1
name "DEFAULT_VLAN"
untagged A1-A24,B1-B4
ip address 10.10.24.100 255.255.255.0
exit
password manager
Figure 5-14. Using the show run Command to View the Current Authentication MIB Access State
5-32