Configuring Secure Socket Layer (SSL)
Configuring the Switch for SSL Operation
CLI Command to view host certificates.
Syntax: show crypto host-cert
Displays switch’s host certificate
To view the current host certificate from the CLI you use the show crypto host-
cert command.
For example, to display the new server host certificate:
Figure 8-4. Example of show crypto host-cert command
Generate a Self-Signed Host Certificate with the Web browser
interface
You can configure SSL from the web browser interface. For more information
on how to access the web browser interface refer to the chapter titled “Using
the ProCurve Web Browser Interface” in the Management and Configuration
Guide for your switch.
8-12
To Next Page
Loading...
