Configuring RADIUS Server Support for Switch Services
Configuring and Using RADIUS-Assigned Access Control Lists
ProCurve(config)# show port-access authenticator 2-3
Port Access Authenticator Status
Port-access authenticator activated [No] : No
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Auth Unauth Untagged Tagged Kbps In RADIUS Cntrl
Port Clients Clients VLAN VLANs Port COS Limit ACL Dir
---- -------- -------- -------- ------ --------- ----------- ------ ----
-
2 1 0 1 7 90 No In
3 1 0 1 5 50 Yes In
Figure 6-8. Example of Output Showing Current RADIUS-Applied Features
ICMP Type Numbers and Keywords
Below are the possible optional ICMP type specifiers for the icmp-type param-
eter.
Table 6-5. ICMP Type Numbers and Keywords
IPv4 ICMP
#
Keyword
0
3
4
5
8
9
10
11
12
13
14
15
16
17
18
echo reply
destination unreachable
source quench
redirect
echo request
router advertisement
router solicitation
time-to-live exceeded
IP header bad
timestamp request
timestamp reply
information request
information reply
address mask request
address mask reply
6-28
To Next Page
Loading...
Need help?
General