Configuring RADIUS Server Support for Switch Services
Configuring and Using RADIUS-Assigned Access Control Lists
Permit: An ACE configured with this action allows the switch to forward an
inbound packet for which there is a match within an applicable ACL.
Permit Any Any: An abbreviated form of permit in ip from any to any, which
permits any inbound IP traffic from any source to any destination.
RADIUS-Assigned ACL: An ACL application type in which the ACL is
assigned by a RADIUS server to a port to filter inbound IP traffic from a
specific client authenticated by the server for that port.
Static Port ACL: An ACL statically configured on a specific port, group of
ports, or trunk. A static port ACL filters all incoming traffic on the port,
regardless of whether it is switched or routed.
VSA (Vendor-Specific-Attribute): A value used in a RADIUS-based config-
uration to uniquely identify a networking feature that can be applied to a
port on a given vendor’s switch during an authenticated client session.
Wildcard: The part of a mask that indicates the bits in a packet’s IP addressing
that do not need to match the corresponding bits specified in an ACL. See
also ACL Mask on page 6-10.
6-11
To Next Page
Loading...
