Configuring Secure Shell (SSH)
Further Information on SSH Client Public-Key Authentication
The operator option replaces the key(s) for operator
access (default); follow with the ‘append’ option to add
the key(s).
For switches that have a separate out-of-band manage-
ment port, the oobm parameter specifies that the traffic
will go through the out-of-band management interface.
If this parameter is not specified, the traffic goes
through the data interface. The oobm parameter is not
available on switches that do not have a separate out-
of-band management port. Refer to Appendix G, “Net-
work Out-of-Band Management” in the Management
and Configuration Guide for more information on out-
of-band management.
show crypto client-public-key [<manager | operator>] [keylist-str] [babble
| fingerprint]
Displays the client public key(s) in the switch’s current
client-public-key file.
The babble option converts the key data to phonetic
hashes that are easier for visual comparisons.
The fingerprint option converts the key data to hexadec-
imal hashes that are for the same purpose.
The keylist-str selects keys to display (comma-delimited
list).
The manager option allows you to select manager public
keys
The operator option allows you to select operator public
keys.
Note copy usb pub-key file can also be used as a method for copying a public key file
to the switch.
7-28
To Next Page
Loading...
