Security Overview
Getting Started with Access Security
4. The summary setup screen displays the current configuration settings for
all setup options (see Figure 1-3).
Figure 1-3. Management Interface Wizard: Summary Setup
From this screen, you have the following options:
• To change any setting that is shown, type in a new value or make a
different selection.
• To apply the settings permanently, click Apply.
• To quit the Setup screen without saving any changes, click Exit.
• To return to the previous screen, click Back.
Web Wizard: Operating Notes and Restrictions.
■If you click on the Web interface’s navigation tab during setup, all
configuration changes will be lost.
â– When you restrict SNMP access to SNMPv3 only, the SNMPv2 options are
not available.
â– The option to restrict Web Access to SSL is made available only if a server
certificate has been previously installed on the switch.
1-14
To Next Page
Loading...
Need help?
General