To Next Page

To Previous Page

Processor

Description

Intel Core i7-6700 processor

Intel Core i5-6600 processor

Intel Core i5-6500 processor

Intel Core i3-6320 processor

Intel Core i3-6300 processor

Intel Core i3-6100 processor

Intel Pentium G4520 processor

Intel Pentium G4500 processor

Intel Pentium G4400 processor

Intel Celeron G3920 processor

Intel Celeron G3900 processor

1. Prepare the computer for disassembly (Preparation for disassembly on page 23).

2. Remove the access panel (Access panel on page 24).

3. Remove the fan sink (Fan sink on page 56).

4. Rotate the locking lever to its full open position (1).

5. Raise and rotate the microprocessor retainer to its fully open position (2).

6. Lift the processor (3) straight up and remove it.

CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and handling

them could cause irreparable damage. Once pins are damaged it may be necessary to replace the

system board.

The heat sink must be installed within 24 hours of installing the processor to prevent damage to the

processor’s solder connections.

Reverse the removal procedure to install a new processor.

Processor 57

Other manuals for HP ProDesk 490 G3 MT

Questions and Answers:

Need help?

Do you have a question about the HP ProDesk 490 G3 MT and is the answer not in the manual?

General