To Next Page

To Previous Page

Recovering the Conguration Settings

This method of recovery requires that you rst perform the Save to Removable Media command with the

Computer Setup (F10) Utility before Restore is needed. (See Computer Setup–Main on page 69 in the

Computer Setup—File table.)

The Save to Removable Media option creates a le named HPSETUP.TXT on an inserted USB ash media

device. This le can be edited to change the settings on Restore. An asterisk (*) marks the selected option for

a setting.

NOTE: It is recommended that you save any modied computer conguration settings to a USB ash media

device and save the device for possible future use.

To restore the conguration, insert the USB ash media device with the saved conguration and perform the

Restore from Removable Media command with the Computer Setup (F10) Utility. (See Computer Setup–Main

on page 69 in the Computer Setup—File table.)

78 Chapter 5 Computer Setup (F10) Utility

Other manuals for HP ProDesk 490 G3 MT

Questions and Answers:

Need help?

Do you have a question about the HP ProDesk 490 G3 MT and is the answer not in the manual?

General