EasyManuals Logo

HP ProDesk 490 G3 MT User Manual

HP ProDesk 490 G3 MT
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Computer date and time display is incorrect.
Cause Solution
RTC (real-time clock) battery may need to be replaced.
NOTE: Connecting the computer to a live AC outlet prolongs the
life of the RTC battery.
Reset the date and time under Control Panel (Computer Setup
can also be used to update the RTC date and time). If the problem
persists, replace the RTC battery. See the Removal and
Replacement section for instructions on installing a new battery,
or contact an authorized dealer or reseller for RTC battery
replacement.
To access Control Panel in Windows 7, select Start, and then
select Control Panel.
To access Control Panel in Windows 8.1, from the Start screen,
type c, and then select Control Panel from the list of
applications.
To access Control Panel in Windows 10, type control panel in
the taskbar search box, and then select Control Panel.
There is no sound or sound volume is too low.
Cause Solution
System volume may be set low or muted. 1. Check the Computer Setup settings to make sure the
internal system speaker is not muted (this setting does not
aect the external speakers).
2. Make sure the external speakers are properly connected and
powered on and that the speakers' volume control is set
correctly.
3. Use the system volume control available in the operating
system to make sure the speakers are not muted or to
increase the volume.
Cannot remove computer cover or access panel.
Cause Solution
Smart Cover Lock, featured on some computers, is locked. Unlock the Smart Cover Lock using Computer Setup.
In case of forgotten password, power loss, or computer
malfunction, you must manually disable the Smart Cover lock . A
key to unlock the Smart Cover Lock is not available from HP. Keys
are typically available from a hardware store.
Poor performance.
Cause Solution
Processor is too hot. 1. Make sure airow to the computer is not blocked. Leave a
10.2-cm (4-inch) clearance on all vented sides of the
computer and above the monitor to permit the required
airow.
2. Make sure fans are connected and working properly (some
fans only operate when needed).
82 Chapter 6 Troubleshooting without diagnostics

Table of Contents

Other manuals for HP ProDesk 490 G3 MT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProDesk 490 G3 MT and is the answer not in the manual?

HP ProDesk 490 G3 MT Specifications

General IconGeneral
Operating SystemWindows 10 Pro
Form FactorMicrotower
Memory Slots2 DIMM
Memory TypeDDR4-2133
Maximum Memory32 GB
Weight7.05 kg
ProcessorIntel Core i5, i3
RAMUp to 32GB DDR4
Storage500 GB HDD
GraphicsIntel HD Graphics 530
ChipsetIntel H110 Chipset
Internal Drive Bays1 x 3.5"
External Drive Bays1 x 5.25"
Expansion Slots1 PCIe x16
Ports (Front)2 USB 3.0
Ports (Rear)1 VGA
AudioRealtek ALC221
Optical DriveDVD-Writer

Related product manuals