HP ProLiant DL360 Gen9

Specifications 141
Specification
Value
controller, seven fans)
LFF minimum (one drive, one
processor, one power supply, two
heatsinks, one Smart Array
controller, five fans)
13.77 kg (30.36 lb)
LFF maximum (Four drives, two
processors, two power supplies,
two heatsinks, one Smart Array
controller, seven fans)
16.78 kg (37 lb)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
• HPE 500W Flex Slot Platinum Hot-plug Power Supply
• HPE 800W Flex Slot Platinum Hot-plug Power Supply (on page 142)
• HPE 800W Flex Slot Titanium Plus Hot-plug Power Supply (on page 142)
• HPE 800W Flex Slot Universal Hot-plug Power Supply (on page 143)
• HPE 800W Flex Slot -48VDC Hot-plug Power Supply (on page 143)
• HPE 1400W Flex Slot Platinum Plus Hot-plug Power Supply (on page 144)
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/proliant/powersupply).
HPE 500W Flex Slot Platinum Hot-plug Power Supply
Specification
Value
Input requirements
Rated input voltage
100 to 127 VAC
200 to 240 VAC
240 VDC for China only
Rated input frequency
50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current
5.8 A at 100 VAC
2.8 A at 200 VAC
2.4 A at 240 VDC for China only
Maximum rated input power
580 W at 100 VAC
560 W at 200 VAC
576 W at 240 VDC for China only
BTUs per hour
1979 at 100 VAC
1911 at 200 VAC
1965 at 240 VDC for China only
Power supply output
Rated steady-state power
500 W at 100 VAC to 127 VAC
input
500 W at 200 VAC to 240 VAC
input
500 W at 240 VDC input for China
only
Maximum peak power
500 W at 100 VAC to 127 VAC
input