Hardware options installation 85
Systems Insight Display module
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause ESD.
1. Back up all server data.
2. Power down the server (on page 21).
3. Do one of the following:
o Extend the server from the rack (on page 21).
o Remove the server from the rack (on page 22).
4. Remove the access panel (on page 22).
5. Disconnect the Power/UID/USB cable from the front power button/USB 3.0 connector on the system
board.
6. Remove the Power/UID/USB assembly.
To Next Page
Loading...
