Hardware options installation 94
7.
Install the expansion board:
o Primary riser cage
o Secondary riser cage
8. Connect any required internal or external cables to the expansion board. See the documentation that
ships with the expansion board.
9. Install the PCI riser cage (on page 24).
10. Install the access panel (on page 22).
11. Install the server into the rack.
12. Connect each power cord to the server.
13. Connect each power cord to the power source.
14. Power up the server ("Powering up the server" on page 21).
Location discovery services ear option
1. Remove all power:
To Next Page
Loading...
