Setup 31
2.
Connect the peripheral devices to the server.
Slot 1 PCIe3 x16 (16, 8, 4, 1)
Slot 2 PCIe 3 x8 ( 8, 4, 1)
Slot 3 PCIe 3 x16 ( 16, 8, 4, 1)*
Serial connector (optional)
*The slot 3 PCIe 3 riser is optional and requires a second processor before installation.
3.
Connect the power cord to the server.
4. Use the hook-and-loop strap to secure the power cord.
5. Connect the power cord to the power source.
Powering on and selecting boot options in UEFI
Boot Mode
On servers operating in UEFI Boot Mode, the boot controller and boot order are set automatically.
1. Press the Power On/Standby button.
2. During the initial boot:
To Next Page
Loading...
