HP ProLiant DL380 G3 with MSA1000 User Manual

Setup and Installation of the Packaged Cluster
2. Use the instructions provided on the rack template to mark the rack for rail
locations.
WARNING: The storage system weight, as assembled for shipping, exceeds
22.7 kg (50 lb). Install the storage system in the lowest available position in the
rack.
IMPORTANT: Unless you are converting the rails for use in round-hole racks, do not remove
the pins from the ends of the rack rails. These load-bearing pins are designed to fit through the
holes without being removed.
NOTE: Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal.
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide 2-19
HP CONFIDENTIAL Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 1:59 PM

HP ProLiant DL380 G3 with MSA1000 Specifications

General

Rack Height	2U
Hard Drive Interface	Ultra320 SCSI
Remote Management	Integrated Lights-Out (iLO)
Memory	PC2100 DDR SDRAM
Storage Controller	Smart Array 5i Plus
Network	Dual embedded NC7781 Gigabit NIC
Expansion Slots	6 PCI-X (64-bit/100 MHz)
Form Factor	Rackmount
MSA1000 Storage	External storage enclosure connected via SCSI
RAID Levels	0, 1, 5
Power Supply	Redundant Power Supply Optional
Drive Bays	6 hot-plug SCSI bays
Operating System Support	Windows Server, Linux
Processor	Intel Xeon (up to 3.6 GHz)