EasyManua.ls Logo

HP ProLiant Gen9 - Message Identifiers 24800-24808

HP ProLiant Gen9
410 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HP Smart Array errors 156
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that the <drive type> physical drive located in
bay <bay number> has passed a pre-defined usage threshold.
It currently has <days or percent> <days of / percentage> usage remaining.
Indicates that the drive is approaching the maximum usage limit for writes (wear
out).
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24799
Severity: Warning
Log message: The <drive type> physical drive located in bay <bay number> could not
be authenticated as a genuine HP hard drive. This drive's status LEDs will not
be controlled. This drive can be found in box <box number> which is connected
to port <port number> of the array controller <controller name / slot
information>.
Message identifiers 24800-24808
Message Id: 24800
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that the%3physical drive located in bay <bay
number> could nobe authenticated as a genuine HP hard drive. This drive's status
LEDs will not be controlled.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24801
Severity: Informational
Log message: Array controller <controller name / slot information> has reported that
its cache is missing. This is an unsupported configuration.
Message Id 24802
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that its cache is missing. This is an unsupported
configuration.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24803
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
it previously locked up with code <lockup code>.
Message Id 24804
Severity: Warning

Table of Contents

Related product manuals