HP ProLiant Gen9 - LCD Log Messages

HP Onboard Administrator errors 184
OA: WARNING: DNS resolution has failed. This will impair OA operation
significantly.
OA: WARNING: The DNS resolution for is slow, one or more DNS servers may be down.
This will impair OA operation.
OA: The DNS resolution is working again.
OA: WARNING: DNS resolution has failed. This will impair OA operation
significantly.
OA: WARNING: The DNS resolution is slow, one or more DNS servers may be down.
This will impair OA operation.
OA: The DNS resolution is working again.
OA: Restarted the System Logger.
Log type: LOG_CRIT, Failure type: SW
OA: Onboard Administrator %d domain name change failed.
Log type: LOG_ALERT, Failure type: SW
OA: Cannot start Network Monitoring.
LCD log messages
Log type: LOG_ERR, Failure type: SW
OA: Blade [value:bladeNumber]: KVM access denied.
OA: Consume SEMV post failed errno [value]
OA: Error creating fifo SAVEPNG_FIFO ". No screenshot thread available"
OA: Error opening fifo SAVEPNG_FIFO ". No screenshot thread available"
OA: KVM Bay [value:bladeNumber] - All HTTP sessions to ILO are full. Wait a few
seconds and try again.
OA: KVM Bay [value:bladeNumber] - Connection to blade failed.
OA: KVM Bay [value:bladeNumber] - Connecting to blade failed because the blade
is powered off.
OA: KVM Bay [value:bladeNumber] - Could not connect. Error([value]).
OA: KVM Bay [value:bladeNumber] - Could not connect. If error persists reboot
the OA.
OA: KVM Bay [value:bladeNumber] - Could not create thread.
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Bad getmore
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Bad next state
detected.
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Bad state transition
detected.
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Exit state detected.
OA: KVM Socket connect error [value] ([value]) to ILO addr
[value:Address]:[value:port]
OA: KVM Socket creation error [value] ([value]) to ILO addr[value:Address]
OA: Mutex SEMV post failed errno [value]
OA: Mutex SEMV wait failed errno [value]