EasyManua.ls Logo

HP ProLiant Gen9 - Smart Array Windows Driver Errors

HP ProLiant Gen9
410 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HP Smart Array errors 157
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that it previously locked up with code <lockup
code>.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24805
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
Supercap is enabled but the cache module flash memory is missing. This is an
unsupported configuration.
Message Id 24806
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that Supercap is enabled but the cache module
flash memory is missing. This is an unsupported configuration.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24807
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
the cache module flash memory is installed but Supercap is disabled. This is an
unsupported configuration.
Message Id 24808
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that the cache module flash memory is installed
but Supercap is disabled. This is an unsupported configuration.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Smart Array Windows driver errors
Message Id: 5001
Severity: Error
Log message: The controller in slot %3 (bus %4, device %5, function %6) heartbeat
has not changed in %2 seconds.
Message Id: 5002
Severity: Error
Log message: The driver has taken the failed controller in slot %2 (bus %3, device
%4, function %5) offline.
Message Id: 5003
Severity: Error

Table of Contents

Related product manuals