Microsoft Windows Event ID and SNMP traps 273
Event identifier: cpqhsmsg.dll - 2312 (Hex)0x84350908 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not create its main thread of execution. The data contains the error
code.
Event identifier: cpqhsmsg.dll - 2313 (Hex)0x84350909 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent main thread did not terminate properly. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2314 (Hex)0x8435090a (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent got an unexpected error code while waiting for an event. The data
contains the error code.
Event identifier: cpqhsmsg.dll - 2315 (Hex)0x8435090b (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent did not respond to a request. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2316 (Hex)0x8435090c (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent received an unknown action code from the service. The data contains the
action code.
Event identifier: cpqhsmsg.dll - 2317 (Hex)0x8435090d (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not get the system type. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2354 (Hex)0x84350932 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not create an SNMP session. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2355 (Hex)0x84350933 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent SNMP request failed. The data contains the error code. Action: 1) Be sure
that the SNMP service is configured to allow SNMP requests from “localhost”. 2) Be sure that there is an
adequate amount of free memory.
Event identifier: cpqhsmsg.dll - 2356 (Hex)0x84350934 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2357 (Hex)0x84350935 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not set the variable because it is unsupported. The data contains
the error code.
Event identifier: cpqhsmsg.dll - 2358 (Hex)0x84350936 (Service Event)
To Next Page
Loading...
