HP ProLiant Gen9 - Page 372

Microsoft Windows Event ID and SNMP traps 372
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “The power supply [cpqRackPowerSupplyPosition] in enclosure
[cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been set to ok.”
NT Event ID: 1158 (Hex)0x84350486 (cpqsvmsg.dll)
Log Severity: Warning (2)
Event Title: Rack Power Supply Removed
Log Message: The power supply has been removed.
SNMP Trap: cpqRackPowerSupplyRemoved - 22016 in CPQRACK.MIB
Symptom: The power supply has been removed.
User Action: None.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackPowerSupplyEnclosureName
• cpqRackPowerSupplySerialNum
• cpqRackPowerSupplyPosition
• cpqRackPowerSupplyFWRev
• cpqRackPowerSupplySparePartNumber
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “The power supply [cpqRackPowerSupplyPosition] in enclosure
[cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been removed.”
NT Event ID: 1159 (Hex)0x44350487 (cpqsvmsg.dll)
Log Severity: Information (1)
Event Title: Rack Power Supply Inserted
Log Message: The power supply has been inserted.
SNMP Trap: cpqRackPowerSupplyInserted - 22017 in CPQRACK.MIB
Symptom: The power supply has been inserted.
User Action: None.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName