HP ProLiant ML370 Generation 3 - Recommended Expansion Slot Population Order

Installing Hardware Options
3-72 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: d-ch03 Installing Hardware Options.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 12:45 PM
Table 3-14: PCI-X Expansion Slots
Item Description Bus Width Speed Signaling
1 PCI-X slot 1
2 PCI-X slot 2
2
3 PCI-X slot 3
4 PCI-X slot 4
10
5 PCI-X slot 5
6 PCI-X slot 6 *
6
64-bit 100-MHz 3.3-V
* Install Remote Insight Lights-Out Edition II boards in PCI-X slot 6 only.
Performance Balancing
Balancing is the paired arrangement of expansion boards for optimal performance
based on the bus architecture of the expansion slots. When populating boards on a
shared bus, be sure that both boards operate at the same speed (two PCI boards or
two PCI-X boards). To balance expansion board performance, populate slots across
different buses before populating two slots on the same bus. Table 3-15 provides a
recommended expansion slot population order.
Table 3-15: Recommended Expansion Slot Population Order
Slot Number Population Order PCI-X Bus Sharing
1 1
2 4
Shared PCI-X bus
3 2
4 5
Shared PCI-X bus
5 3
6 6
Shared PCI-X bus
Note: This population order is only a recommendation. Expansion boards
can reside in any slot.