HP ProLiant ML370 Generation 3 Server Setup and Installation Guide B-1
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: j-appb Electrostatic Discharge.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:32 PM
B
Electrostatic Discharge
To prevent damaging the system, be aware of the precautions you must follow when
setting up the system or handling parts. A discharge of static electricity from a finger
or other conductor may damage system boards or other static-sensitive devices. This
type of damage may reduce the life expectancy of the device.
Preventing Electrostatic Discharge
To prevent electrostatic damage, observe the following precautions:
• Avoid hand contact by transporting and storing products in static-safe containers.
• Keep electrostatic-sensitive parts in their containers until they arrive at static-free
workstations.
• Place parts on a grounded surface before removing them from their containers.
• Avoid touching pins, leads, or circuitry.
• Always be properly grounded when touching a static-sensitive component or
assembly.
To Next Page
Loading...
