HP ProLiant ML370 Generation 3 - Cabling a Smart Array or Other RAID Controller

Server Cabling
6-6 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: g-ch06 Server Cabling.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:15 PM
Cabling a Smart Array or Other RAID Controller
To cable a Smart Array or other RAID controller:
1. Disconnect the SCSI cable from the primary SCSI connector on the system
board.
Figure 6-5: Disconnecting the primary SCSI cable