Planning the Server Installation
2-10 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch02 Planning the Server Installation.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:11 PM
The contents of the rack server box provided with the server includes the following:
• Server
• Power cord
• Hardware documentation, reference information, and software products
• Rack-mounting hardware
NOTE: A Torx T-15 tool is provided with the server and is located on the rear panel.
Figure 2-1 and Table 2-1 identify all the components and assembly hardware in the
rack kit.
Figure 2-1: Rack kit contents
To Next Page
Loading...
