Installing the Rack Server
4-10 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: e-ch04 Installing the Rack Server.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:12 PM
Installing the Server in the Rack
CAUTION: To avoid destabilizing the rack, install servers starting from the bottom of
the rack.
To install the server in the rack:
1. Use the server handles located on both sides of the server to lift it into position.
Figure 4-7: Lifting with the server handles
To Next Page
Loading...
