Installing Hardware Options
3-2 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: d-ch03 Installing Hardware Options.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 12:45 PM
Tower and Rack Server Components
The primary differences between the tower and rack servers are the chassis
orientations and front bezel configurations. Figure 3-1 and Table 3-1 identify chassis
components. Refer to “Preparing the Server,” in this chapter, for instructions on
opening the access panel, the media door on the rack server, or the front bezel on the
tower server to access server components.
Figure 3-1: Tower and rack chassis components
Table 3-1: Tower and Rack Chassis Components
Item Description
1 Access panel
2 Power-On/Standby button/LED assembly
3 Diskette drive
4 Removable media bays
5 Hot-plug SCSI hard drive cage
To Next Page
Loading...
