Regulatory Compliance Notices
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide A-7
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: i-appa Regulatory Compliance Notices.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:25 PM
Compliance with International Regulations
All systems equipped with laser devices comply with appropriate safety standards
including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the supplied laser
device.
This label indicates that the product is
classified as a CLASS 1 LASER PRODUCT.
This label appears on a laser device installed
in your product.
Laser Information
Laser Type Semiconductor GaAIAs
Wave Length 780 nm +/- 35 nm
Divergence Angle 53.5 degrees +/- 0.5 degrees
Output Power Less than 0.2 mW or 10,869 W·m-2 sr-1
Polarization Circular 0.25
Numerical Aperture 0.45 inches +/- 0.04 inches
To Next Page
Loading...
