LED Indicators and Switches
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide E-15
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: m-appe LED Indicators and Switches.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:48 PM
System Board Switches
Some server operations, including adding or removing a component, changing a
security feature, or reconfiguring the server from tower to rack, require that you
reconfigure a system switch. If the system configuration is incorrect, the server may
not work properly and you may receive error messages on the screen.
This section discusses the following system board switches:
• System maintenance
• System identification
Figure E-8: System board switches
Table E-8: System Board Switches
Item Description
1 System maintenance switch (SW1)
2 System identification switch (SW2)
To Next Page
Loading...
