Server Configuration and Utilities
7-20 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: h-ch07 Server Configuration and Utilities.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:23 PM
Auto-Configuration Process
The auto-configuration process automatically runs when you boot the server for the
first time. During the power-up sequence that occurs, the system ROM automatically
configures the entire system without needing any intervention. During this process,
the Option ROM Configuration for Arrays (ORCA) utility in most cases
automatically configures the array to a default setting based on the number of drives
connected to the server.
Figure 7-1: Auto-configuration screen
To Next Page
Loading...
