Server Features
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 1-5
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: b-ch01 Server Features.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:09 PM
Expansion Slots
The server provides support for installing or connecting peripheral components
through six PCI-X expansion slots. The expansion slots on the system board are
configured as follows:
• Six 64-bit/100-MHz, full-length PCI-X slots
• Peak transfer rates of 800 MB per second
• Peered PCI-X bus architecture
• Support for peripheral transactions at a clock speed of up to 100 MHz
Integrated SCSI Controller
The server includes a standard Integrated Dual Channel Ultra3 SCSI Controller with:
• 64-bit/66-MHz PCI bus master interface
• Ultra3 SCSI bus transfer rate with peak transfer rate of 160 MB per second per
channel
• Two SCSI ports supporting up to six internal hot-plug Wide Ultra2 or Ultra3
SCSI hard drives
• Optional internal two-bay hot-plug SCSI drive cage for the removable media bay
• Support for external tape drives and external storage through a VHDCI SCSI
connector on the rear panel
• Support for hot-plug tape drives and hard drives in six hot-plug SCSI drive bays
• Support for non-hot-plug tape drives and hard drives in removable media bays
To Next Page
Loading...
