Server Cabling
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 6-5
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: g-ch06 Server Cabling.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:15 PM
Internal Tape Drives
The server provides support for up to two internal tape drives including DAT, DLT,
or the Universal Hot-Plug Tape Drive. Internal devices installed in the removable
media cage are cabled directly to SCSI port 2 on the system board with a three-device
terminated cable. Figure 6-4 shows standard cable routing from the removable media
cage to the system board with the CD-ROM drive installed.
Figure 6-4: Cabling an internal tape drive to SCSI port 2
To Next Page
Loading...
