Server Cabling
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 6-7
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: g-ch06 Server Cabling.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:15 PM
2. Connect the SCSI cable to the Smart Array Controller or other RAID controller.
Figure 6-6: Connecting the SCSI cable to the SCSI
controller option
NOTE: Both SCSI channels are self-terminating. If you choose to not use one or both SCSI
channels, you do not need to terminate the unused channel(s).
To Next Page
Loading...
