Installing the Rack Server
4-2 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: e-ch04 Installing the Rack Server.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:12 PM
Additional information includes routine maintenance guidelines and an overview of
optional rack adapter kits available for installing the server in a Telco or round-hole
rack. Complete instructions for using adapter kits to install the server in a rack are
included with each option kit. For information about obtaining rack option kits, refer
to
www.hp.com/products/servers/platforms
Figure 4-1 shows a server installed in a rack. Install heavier devices, such as UPS
units, in the lower rack positions.
Figure 4-1: Server installed in the rack
You can choose the optional installation service from HP to install rack products.
Refer to “Optional Installation Service” in Chapter 2 for additional information.
To Next Page
Loading...
