Installing the Rack Server
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 4-21
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: e-ch04 Installing the Rack Server.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:12 PM
6. Reboot the server.
7. Follow the instructions provided by SmartStart or the operating system
manufacturer.
For more information about using RBSU or SmartStart to configure the server, refer
to Chapter 7, “Server Configuration and Utilities.”
After RBSU configures the hardware for the first time, use SmartStart to install an
operating system.
The server supports the following operating systems:
• Microsoft Windows NT and Windows 2000
• Linux
• Novell NetWare
• SCO OpenServer and UnixWare
• Sun Solaris Intel Platform Edition
• IBM OS/2
For the most current information about operating system support on the server, refer
to
www.hp.com/products/servers/platforms
To Next Page
Loading...
