Server Specifications
F-2 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: n-appf Server Specifications.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:52 PM
Table F-1: Server Specifications
Dimensions Tower model Rack model
Height (with feet) 46.88 cm (18.46 in) N/A
Height (without feet) 44.45 cm (17.50 in) 22.07 cm (8.69 in)
Depth (without bezel) 63.50 cm (25.00 in) 65.43 cm (25.75 in)
Depth (with bezel) 71.12 cm (28.00 in) N/A
Width 22.07 cm (8.69 in) 48.26 cm (19.0 in)
Weight (with no drives
installed)
33.95 kg (74.70 lb) 33.39 kg (73.46 lb)
Input requirements
Rated input voltage 90 to 264 VAC
Rated input frequency 47 to 63 Hz
Rated input current 7.3 A (110 V) to 3.6 A (220 V)
Rated input power 800 W
BTUs per hour 2732
Power supply output
Rated steady-state power 500 W
Maximum peak power 550 W for 2 minutes
Temperature range *
Operating
5° to 35°C (41° to 95°F)
Shipping
-40° to 85°C (-40° to 185°F)
Maximum wet bulb temperature
38.7°C (101.7°F)
Relative humidity (noncondensing)
Operating 5% to 95%
Non-operating 5% to 95%
* All temperature ratings shown are for sea level. There is an altitude
derating of 1°C per 300 m (1.8°F per 1,000 ft to 10,000 ft).
To Next Page
Loading...
