Installing Hardware Options
3-28 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: d-ch03 Installing Hardware Options.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 12:45 PM
b. Insert the processor assembly into the processor socket (1).
c. Close the processor locking lever while pressing down on the heatsink(2).
CAUTION: To prevent possible server malfunction or damage to the equipment,
be sure to completely close the processor locking lever.
IMPORTANT: If the processor locking lever is not secured, the processor retaining
bracket does not close properly.
Figure 3-23: Installing the processor assembly and
securing the processor locking lever
To Next Page
Loading...
