Table 8 RBSU settings
Change to...CurrentSub-sub-settingSub-settingRBSU setting
Maximum
Performance
Balanced Power and
Performance
HP Power ProfilePower Management
Options
HP Static High
Performance Mode
HP Dynamic Power
Savings Mode
HP Power Regulator
DisabledEnabledEmbedded HP Smart Array P420i ControllerPCI Device
Enable/Disable
Current Date and
Current Time
Date and Time
The serial number for
the HPE StoreOnce
Backup system
Blank
Serial NumberService OptionsAdvanced Options
Appropriate BIOS
Product ID shown in
table below
Motherboard defaultProduct Id (ignore
warning displayed)
Service Options
Increased CoolingOptimal CoolingThermal Configuration
Change the BIOS Product ID, as shown in the following table.
Table 9 BIOS Product IDs
BIOS Product ID numberModel
690487–B21HPE StoreOnce 4700 24TB Backup
690485–B21HPE StoreOnce 4500 24TB Backup
775399-B21HPE StoreOnce 2900 24TB Backup
690484–B21HPE StoreOnce 2700 8TB Backup
iLO4 settings
Select the DNS/DHCP option and toggle DHCP Enable to OFF.
If DHCP is set to OFF, select NIC and TCP/IP and configure the network static IP addresses
iLO and BIOS configuration after replacing the motherboard 23
To Next Page
Loading...
