Enabling the Trusted Platform Module as TPM 2.0Enabling the Trusted Platform Module as TPM 2.0
ProcedureProcedure
1. During the compute module startup sequence, press the F9 key to access System Utilities.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Trusted
Platform Module options.
3. Verify the following:
"Current TPM Type" is set to TPM 2.0.
"Current TPM State" is set to Present and Enabled.
"TPM Visibility" is set to Visible.
4. If changes were made in the previous step, press the F10 key to save your selection.
5. If F10 was pressed in the previous step, do one of the following:
If in graphical mode, click Yes.
If in text mode, press the Y key.
6. Press the ESC key to exit System Utilities.
7. If changes were made and saved, the compute module prompts for reboot request. Press the Enter key to confirm reboot.
If the following actions were performed, the compute module reboots a second time without user input. During this reboot, the TPM
setting becomes effective.
Changing from TPM 1.2 and TPM 2.0
Changing TPM bus from FIFO to CRB
Enabling or disabling TPM
Clearing the TPM
8. Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
For more information, see the Microsoft websiteMicrosoft website .
To Next Page
Loading...
