HP Synergy 480 Gen10 - Installing the Energy Pack Option

Installing the energy pack optionInstalling the energy pack option
Hewlett Packard Enterprise now offers two options as a centralized backup power source for backing up write cache content on Smart
Array controllers if there is an unplanned server power loss.
HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor
IMPORTANT:IMPORTANT:
The HPE Smart Storage Hybrid Capacitor is only supported on Gen10 and later servers.
Only one energy pack is required per server, as it can support multiple devices.
ProcedureProcedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Facing the front of the compute module, remove the DIMM baffle .
6. Install the energy pack.
Installing the energy pack option 63