HP Synergy 480 Gen10 - Server Requirements for NVDIMM Support

Server requirements for NVDIMM supportServer requirements for NVDIMM support
Before installing an HPE 16GB NVDIMM in a compute module, make sure that the following components and software are available:
A supported HPE server using Intel Xeon Scalable Processors: For more information, see the NVDIMM QuickSpecs on the Hewlett
Packard Enterprise website (https://www.hpe.com/info/qshttps://www.hpe.com/info/qs).
An HPE Smart Storage Battery
A minimum of one regular DIMM: The system cannot have only NVDIMM-Ns installed.
A supported operating system with persistent memory/NVDIMM drivers. For the latest software information, see the Hewlett
Packard Enterprise website (https://persistentmemory.hpe.comhttps://persistentmemory.hpe.com).
For minimum firmware versions, see the HPE 16GB NVDIMM User Guide on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/nvdimm-docshttps://www.hpe.com/info/nvdimm-docs).
To determine NVDIMM support for your compute module, see the compute module QuickSpecs on the Hewlett Packard Enterprise
website (https://www.hpe.com/info/qshttps://www.hpe.com/info/qs).
Server requirements for NVDIMM support 71